proAqua Lacquer

Ecozmo proAqua Lacquer

Ecozmo proAqua Lacquer A high technology product for wood surfaces without the use of PU (polyurethane), Alkyd and Acrylic (Polymer). It was introduced in 2008 in Germany and Hong Kong. The product uses water for dilution. Ecozmo pro-Aqua Lacquer is a hardwearing clear finish that enhances the appearance of wood grain and its colour and is suitable for all interior timber parquet floors made of hard and softwood. The durable silky matt finish is resistant to light and staining.

It is formaldehyde-free and low in VOC - meeting the strict EU 2010 standard. Ecozmo pro-Aqua Lacquer is also suitable for application on treating doors, worktops, tables, stairs, toys and furniture, etc and is available in 84 colours tinted with VOC-free colorants from Ecozmo Tinting System.

Sort by

Select currency

	11020000 proAqua Lacquer #1L Hardwearing clear finish enhances the appearance of wood colour and gain. Suitable for all interior timber parquet foloors made of hard and softwood. Durable HK$ 598.00

	11030000 proAqua Lacquer #2.5L Hardwearing clear finish enhances the appearance of wood colour and gain. Suitable for all interior timber parquet foloors made of hard and softwood. Durable HK$ 1,428.00

Total 2 products in 1 pages << 1 >>

PRODUCT FEATURES

Uses : It is highly hardwearing, transparent enamel paint is suitable for use on heavily strained surfaces, especially on floorboards and parquet floor, and also for treating doors, worktops, tables, stairs, toys and furniture.

Colour : Clear and solid colours tinted with 'zero' VOC colorant from Ecozmo Natural Mix System.

Ingredients : Water, anti-skinning agent, silicic acid, pure acrylate, butoxyethanole, methylpyrrolidone, preservative.

Pack Size : 1.0 litre & 2.5 litre.

Coverage : 14-16 square metres per litre, depending on the thickness of the coat.

Application Method : Stir carefully before the application. Carefully apply the first coat of Ecozmo proAqua Lacquer with a soft synthetic brush or a short-haired roller (in the direction of the wood grain). When fully dry sand the surface (grain 320), afterwards apply three thin coats.

Technical Info

The content in this site is intended to be of general informational use and is not intended to serve as medial advice or recommended treatments. for more information, please refer to the Terms of Service and Privacy Policy.